INDUSTRY STANDARD
- For 3/4" to 4" (19-100mm) Drain Lines
- A powerful, easy to transport, versatile machine for cleaning indoor drains. Requires minimal
- Rugged, corrosion-resistant molded cable drum won’t dent or rust. The drum tilt adjusts for proper cable feed angle. Inner-drum guards against cable flip-over.
- Cable drum’s quick-release and built-in hand-holds allow easy cable change and transport.
- Standard drum capacity is 100' of 3/8" or 90' of 1/2" (30m/10mm or 27m/12mm) continuous length cable:
- 3/8" cable best for 1 1/2" to 3" lines up to 100'.
- 1/2" cable best for 2" to 4" lines up to 90'.
- Optional sink drum holds up to 50' of 5/16" or 1/4" (15m/8mm) cable.
- Ideal for cleaning through 3/4" to 1 1/2" sink traps.
- Powerful 1/12 HP Universal Motor spins cable at 240 RPM. When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control.
- Tools connect to cable in seconds.
- CSA approved.
- Approved to UL standards (NRTLC).
- IW (Integral Wound) cables available. IW cables are slightly stiffer and kink resistant. All IW cables use 3/8" T-200 series cutters
- K-3800 Machine w/Std. Equip.
- C-45, 1/2" x 75' Cable
- T-102 Funnel Auger
- T-142 Knife Blade Cutter
- T-107 Spade Cutter
- A-12 Pin Key
- Pair of Gloves
Drum Capacity | 100' of 3/8" or 90' of 1/2" |
---|---|
Line Size | 3/4" - 4" |
Manufacturer Warranty | Limited Lifetime |
Model | K-400 |
RPM | 240 |
Shipping Weight | 83 Lbs |
Tool Height | 25" |
Tool Length | 27" |
Tool Weight | 81 Lbs |
Tool Width | 15" |
Typical Application | Industrial, Professional, Serious DIY |
Voltage | 115 Volt |