days
hours
minutes
seconds

LED Lenser

 

FOCUSING SYSTEMS

LIGHT MODES

ANSI STANDARDS

 BATTERIES

 RECHARGEABLES

 MODULAR SYSTEM

 DYNAMIC SWITCH

 X-LENS TECHNOLOGY

Advanced Focus System

Rapid Focus

Blue Moon Focus System

Basic Smart Light Technology

Advanced Smart Light Technology

Optisense Technology

Light Output/Lumens

Beam Distance

Run Time

Water Resistance

 

 


 

 

 

 

 

FOCUSING SYSTEMS


  

ADVANCED FOCUS SYSTEM™

Traditionally, light-focusing systems have consisted of either a lens, or a reflector. TheAdvanced Focus System (AFS) is the patented combination of a reflector AND lens to create a light system that provides both a focused beam for long-distance and a homogenous spill-beam for up-close reading. AFS means whether you’re reading a map up close or focusing down the path to a landmark in the distance, your light will be easy on the eyes, clear and bright.

 

back to top


 

RAPID FOCUS

With our Rapid Focus system you can go from reading to searching by using the thumb on your holding hand to simply slide the bezel away from you. With one hand and one movement, you can achieve seamless transition from close to far and all points in between.

 

 

back to top


 

BLUE MOON FOCUS SYSTEM

Thanks to their special prismatic structure, our lenses separate parts of the blue spectrum from the white spectrum. The blue components are thus projected to the edge of the light cone and the result is an excellent, clean white light to read by with a mellow blue circle to frame the reading area. Blue Moon optics make reading and general viewing easy on the eyes for less eye fatigue.

  

 

back to top


 

 

LIGHT MODES


  

BASIC SMART LIGHT TECHNOLOGY

Smart Light Technology allows you to program your light functions to the task at hand. Three light functions (Power, Low Power, and Defense Strobe) are easily operated with full or half clicks, ensuring your focus will be on the job, not on your light.

 

 

back to top


 

ADVANCED SMART LIGHT TECHNOLOGY

In addition to 8 unique light programs and functions to tailor your light to your needs, Advanced Smart Light Technology also offers two energy modes: Energy Saving mode optimizes burning life, and Constant Current mode features electronically controlled, continuous light output. Smart Light Technology puts you in control and allows you to choose how much power you want to use to operate your light.

 

 

 

back to top


 

OPTISENSE TECHNOLOGY

Thanks to an integrated brightness sensor, light around you can be measured in real time with OPTISENSE Technology. The intensity of your headlamp automatically adjusts based on the brightness in the environment around you, tailoring your light to your activity without fiddling with buttons or switches.

  

 

back to top


 

 

RECHARGEABLES


  

FLOATING CHARGE SYSTEM

What if you could simply pop your light up to a magnet and go? Well, now you can with our unique Floating Charge System. Simply mount the recharging system on the wall and plug it in. When you’re ready to recharge your flashlight, just touch the end-cap to the floating charge magnet and walk away. A charging indicator will tell you when you’re ready to go again. Traveling with your light is no problem – pop off the top of the charging system and plug it into the USB adapter to charge from your laptop, car, or hotel room USB port.

 

 

back to top


 

 

 

BATTERIES


  

SAFETY YTRION CELL BATTERY

The wait is over for a rechargeable battery that takes safety, power and run time to a whole new level. The Safety Ytrion Cell batter from LED LENSER is the first flashlight battery to truly mimic the properties of the hybrid car battery – safe, long run times and the ability to recharge thousands of times without losing significant battery capacity.

 

 

back to top


 

 

 

 

ANSI STANDARDS


  

 

LIGHT OUTPUT/LUMENS

Light Output is the total luminous flux. It is the total quantity of emitted overall light energy as measured by integrating the entire angular output of the portable light source. Light output in this standard is expressed in units of lumens.

 

 

BEAM DISTANCE

 Beam Distance is defined as the distance from the device at which the light beam is 0.25 lux (0.25 lux is approximately the equivalent of the light emitted from the full moon on a "clear night in an open field")

 

 

RUN TIME

 Run Time is defined as the duration of time from the initial light output value-defined as 30 seconds after the point the device is first turned on using fresh batteries, until the light output reaches 10% of the initial value.

 

 

WATER RESISTANCE

 Water Resistant/IPX4 is defined as: water can be splashed against the device from any direction with no harmful effects.

back to top


 

  

 

MODULAR SYSTEM

With our patented modular system, fewer points of electrical contact overall mean fewer chances for system failure. And if something does go wrong, we can repair or replace sections of your light as needed, making it easier, faster and better for the environment to perform our industry leading warranty. 

 

back to top


 

DYNAMIC SWITCH

Professionals want to switch light modes at lightning speed and adjust brightness equally fast. LED LENSER’S Dynamic Switch offers both, simultaneously. Switch between full power, low power and boost within milliseconds with just a half or full click of the tail switch.

 

back to top


X-LENS TECHNOLOGY

An industry first, X-Lens Technology combines multiple LEDs into one seamlessly-projected beam of light. Add to that an optimized heat synching system that enables us to drive our LEDs harder and you get unprecedented output from common batteries in handheld sizes.

 

back to top


 

Show Bottom Bar
Recently Viewed Products
Hide
For the latest deals, join our newsletter!