DEWALT’s DCK290L2, Hammer Drill / Impact Combo Tool Kit features two of DEWALT’s most popular 20 Volt MAX* lithium-ion 3.0 Ah tools. Included in the kit are the powerful DCD985 1/2-inch hammer drill and the high performance yet compact DCF885 1/4-inch impact driver. These two versatile tools are a must for any tradesman or contractor’s tool box. The full featured DCF885 impact driver is perfect for driving fasteners into steel studs, wood decking and a variety of other materials. The heavy duty DCD985 hammer drill can drill dozens of holes on a single charge in hammer mode or can be used to drill holes or drive fasteners in in a multitude of applications drill driver mode. Powered by DEWALT’s 20V MAX* 3.0 Ah Lithium-Ion battery platform the DCK290L2 is perfect in a variety of applications when used by mechanical contractors, woodworkers, plumbers, maintenance departments and general contractors alike.
- DCD985B 20V MAX hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention
- DCF885B 20V MAX 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadow
- DCB200 20V MAX Lithium Ion 3.0 Ah Battery Pack (2)
- DCB101 12V & 20V Fast Charger
- DCK019 Contractor Bag
- 360° Side Handle
- Belt Hook
Included in the Kit
1 -DCD985B 1/2-inch 20 Volt MAX* lithium-ion 3.0 Ah, 3-speed hammer drill
1 - DCF885B 1/4-in 20 Volt MAX* lithium-ion 3.0 Ah impact driver
1 - DCB101 12-Volt MAX and 20-Volt MAX* lithium-ion battery charger
2 - DCB200 20V MAX 3.0 Ah lithium-ion battery packs
1 - DCK019 Ballistic nylon contractor bag
1 - Belt hook
Detailed Component Descriptions:
DCD985B - The DCD985B is a heavy-duty 1/2-inch hammer drill/driver that’s powered by DeWALT’s 20 Volt MAX* lithium-ion 3.0 Ah battery platform offering longer tool runtime and enhanced durability. The DCD985B comes equipped with a patented 3-speed all-metal transmission which is designed so that it matches the tool with the job at hand for the fastest possible application speed and improved battery run time. Although significantly lighter and more compact than its 18 volt predecessor, the DCD985B has a higher power, high efficiency motor that delivers an amazing 535 unit watts out of maximum power. This extra power gives the user superior performance in a variety of fastening, masonry and drilling applications.
The heavy-duty 1/2-inch metal ratcheting chuck provides superior gripping power meaning less down time for chuck adjustments and drill or driver bit slippage. The DCD985B also has a super bright LED light that stays lit for 20 seconds after you release the trigger of the tool to keep your project illuminated until the job is done.
DCF885B - DeWALT's DCF885B is a Heavy Duty, 1/4-inch, 20 Volt Impact Driver. This compact tool (5.55" front to back) is light weight (just 2.8 lbs) and particularly well suited to fit into tight areas. Don't let its small size fool you though, this powerful little driver produces up to 3200 impacts per minute and has a max torque of 117 foot/pounds...plenty of power to handle even the toughest fastening jobs. The DCF885B has a 1/4" hex chuck that offers one-handed bit loading and accepts 1/4-inch hex bits. Three (3) bright LED lights provide clear, shadowless visibility of the work area and are on a 20 second delay so that the work area stays illuminated even after the trigger is released. The DCF885B also comes with a handy belt clip that offers portabilty to the user.
DCB101 - The DCB101 charges all DeWALT® 12V and 20V MAX* Li-Ion (lithium ion) batteries in 1 hour or less thus minimizing downtime. The DCB101 runs advanced diagnostics each time you charge your batteries. An LED indicator communicates the battery charge status:
- Power line problem
- Replace pack
- Battery too hot or too cold
The charger requires a 110 volt power supply and is UL and CSA approved.
DCB200 - 20V MAX 3.0 Ah lithium-ion battery packs offer extended run-time and long battery life. The latest Lithium Ion technology means you won't sacrifice power either. These batteries have no memory and virtually no self-discharge allowing for maximum productivity and less downtime. Compared to traditional NiCAD technology these batteries are extremely light weight (each battery weighs less than 1.5 lbs) reducing user fatigue. The DCB200 also incorporates a 3-LED Fuel Gauge System giving the user immediate feedback on status of the battery charge.
Part Number : DCK290L2
Tool Power Source: Battery-powered
Charger Power Source: 110 Volt AC
Voltage: 20V MAX Lithium Ion
Batteries Included?: Yes (2)
Number of Tools Included in the Kit: 2
Length: 14.50 inches
Width: 10.60 inches
Height: 7.60 inches
Weight: 13.1 Pounds
The DEWALT® DCK290L2 High Performance Industrial Two Tool Combo Kit comes with a warranty package that includes:
- 90 Day Money Back Guarantee
- 1 Year Free Service Contract
- 3 Year Limited Warranty
* 20 Volt MAX - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts.
**Free Shipping subject to Black Rock Tools free shipping policy. For full details click here.